Cable Electronics e labs HS103 - Manual (Page 5)

EX0301-001 Operating Instructionsٻ
1. Input port 1
2. Input port 2
3. Input port 3
4. Output port
5. Indicator of input 1
6. Indicator of input 2
7. Indicator of input 3
8. Indicator of output
9. Source selection
CONNECT AND OPERATION
1) Connect the HDMI input sources s uch as: HD-DVD, PS3, STB etc.˅ into
EX0301-001 .
2) Connect the HDMI output ( such as : HD-LCD, HD-DLP˅ into EX0301-001 .
3) Power on the input source you want to show. (Keep the unused inputs power
off, otherwise they may interfere the normal display.)
4) Power on the display.
˄ Remark˖Manual selection button can be used when the user want to select the source
manually.˅
* Smart Function˖When there are more than one sources connected to the switch. The
user should leave the desired source on, the others off. Then the switch will choose this
source automatically and sending the signal to the display. If several sources are all powered
on, the last powered source will be chosen. Because of this character, user could use the
method of power off/on the source to choose the desired signal.
I nsert / Extract cables gently.
SPECIFICATIONS
Operating Temperature Range -5 to +35°C(-41 to +95 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Video Format Supported DTV/HDTV:1080p/1080i/720p/576p/480p
/576i/480i
Signaling Rates 2.25Gbits x3
Output Video HDMI1.3
Maximum Transmission Distance <20m (AWG28 HDMI cable)
Dimensions 62mmW×62mmH×19mmD
/2.4’’W×2.4’’H×0.7''D
Mass( Main unit ) 40gs/0.08lb
*Note: Specifications are subject to change without notice. Mass and dimensions are
approximate.
ˑ GRANDBEING ®
EX0301-001 Operating Instructionsٻ
1. Input port 1
2. Input port 2
3. Input port 3
4. Output port
5. Indicator of input 1
6. Indicator of input 2
7. Indicator of input 3
8. Indicator of output
9. Source selection
CONNECT AND OPERATION
1) Connect the HDMI input sources s uch as: HD-DVD, PS3, STB etc.˅ into
EX0301-001 .
2) Connect the HDMI output ( such as : HD-LCD, HD-DLP˅ into EX0301-001 .
3) Power on the input source you want to show. (Keep the unused inputs power
off, otherwise they may interfere the normal display.)
4) Power on the display.
˄ Remark˖Manual selection button can be used when the user want to select the source
manually.˅
* Smart Function˖When there are more than one sources connected to the switch. The
user should leave the desired source on, the others off. Then the switch will choose this
source automatically and sending the signal to the display. If several sources are all powered
on, the last powered source will be chosen. Because of this character, user could use the
method of power off/on the source to choose the desired signal.
I nsert / Extract cables gently.
SPECIFICATIONS
Operating Temperature Range -5 to +35°C(-41 to +95 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Video Format Supported DTV/HDTV:1080p/1080i/720p/576p/480p
/576i/480i
Signaling Rates 2.25Gbits x3
Output Video HDMI1.3
Maximum Transmission Distance <20m (AWG28 HDMI cable)
Dimensions 62mmW×62mmH×19mmD
/2.4’’W×2.4’’H×0.7''D
Mass( Main unit ) 40gs/0.08lb
*Note: Specifications are subject to change without notice. Mass and dimensions are
approximate.
ˑ GRANDBEING ®
HS103
CE labs’ Branding Sheet
, t
function,
5
CONNECTION AND OPERATION
1) Connect the HDMI sources (such as: HD-DVD, PS3, STB etc.) into the
HS103 inputs.
2) Connect the HDMI display (such as: HD-LCD, HD-LDP) to the HS103 output.
3) Power on the the input source you want to show. Turn off unused sources as this will
speed up the automatic switching.
4) Power on the display
*Smart Function: When there are more than one source connected to the switch, the
user should leave a desired source on, the others off. The the switch will choose this
source automatically and send the signal to the display. If several sources are all
powered on, the last powered source will be chosen. Beacuse of this function, the user
could use the method of power off/on to select the desired signal.
x 3