Dodge 2015 Journey - Uconnect 4.3 Manual - Manual (Page 16)

numbers that are no longer possible (stations that cannot
be reached) will become deactivated/grayed out.
If you accidently entered the wrong station number, press
the “X” button to clear the radio station numbers and
reenter the correct station number.
Once the last digit of a station has been entered, the
Direct Tune screen will close and the system will auto-
matically tune to that station.
The selected Station or Channel number is displayed in
the Direct Tune text box.
Setting Presets
The Presets are available for all Radio Modes and are
activated by pressing any of the four Preset buttons
located at the top of the touchscreen.
When you are receiving a station that you wish to
commit into memory press and hold the desired num-
bered button for more that two seconds or until you hear
a confirmation beep.
The Radio stores up to 12 presets in each of the Radio
modes. A set of four presets are visible at the top of the
radio touchscreen.
Audio
1. Push the SETTINGS button on the right side of the
unit.
2. Scroll down and press the “Audio” button to enter the
Audio menu.
The Audio Menu shows the following options for you
to customize your audio settings.
Equalizer
• Press the “Equalizer” button to adjust the Bass, Mid
and Treble. Use the “+” or “–” buttons to adjust the
equalizer to your desired settings. Press the “Back
Arrow” button when done.
3
RADIO MODE 15