beautypg.com

Front wipers, Rear wiper, High beams – Dodge 2013 Grand_Caravan - User Guide User Manual

Page 25: Flash to pass, Operating your vehicle

background image

Front Wipers

Intermittent, Low And High Operation

• Rotate the end of the lever to the first detent position for one of five intermittent settings,

the second detent for low wiper operation and the third detent for high wiper operation.

Rain Sensing Wipers

• This feature senses moisture on the vehicle’s windshield and automatically activates the

wipers for the driver when the switch is in the intermittent positions. Refer to Program-
mable Features in Electronics for further details.

Mist

• Push the end of the lever inward to the first detent when a single wipe is desired.

NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be
sprayed on the windshield. The wash function must be activated in order to spray the
windshield with washer fluid.

Washer Operation

• Push the end of the lever inward to the second detent and hold for as long as spray is

desired.

Rear Wiper

• Rotate the center portion of the lever forward to the first detent for rear wiper operation.

Rear Washer

• Rotate the center portion of the lever past the first detent to activate the rear washer.

High Beams

• Push the lever away from you to activate the high beams.

• A high beam symbol will illuminate in the cluster to indicate the high beams are on.

NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on until

the lever is released.

OPERATING YOUR VEHICLE

23