Dodge 2013 Durango - User Guide - Manual (Page 23)

FRONT SEATS
Power Seats
• The power recline switch, located on the
outboard side of the seat, controls seat-
back adjustment.
• The power seat switch controls forward/
back, up/down and tilt adjustment.
Power Lumbar
• Push the switch forward to increase the
lumbar support. Push the switch rearward
to decrease the lumbar support.
• Pushing upward or downward on the
switch will raise and lower the position of
the support.
Memory Seat
• The memory seat feature allows you to
save two different driver seating positions
(excluding lumbar position), outside mir-
rors, tilt/telescoping steering column po-
sition, and radio station preset settings.
The memory seat buttons are located on
the driver's door panel.
• Adjust all memory profile settings, press
the SET button then press 1 or 2 within
five seconds.
• To program a Key Fob to the memory po-
sition, place the ignition switch in the
LOCK position and remove the Key Fob, press and release the LOCK button on the Key Fob
to be programmed within 5 seconds of pressing button 1 or 2.
GETTING STARTED
21