beautypg.com

Manual transmission, To accelerate for passing – Dodge 2012 Caliber - Owner Manual User Manual

Page 167

background image

released. Release the lever when the desired speed is
reached, and the new set speed will be established.

Pressing the SET DECEL lever once will result in a 1 mph
(2 km/h) decrease in set speed. Each subsequent tap of
the lever results in a decrease of 1 mph (2 km/h).

Manual Transmission

Pressing the clutch pedal will disengage the speed con-
trol. A slight increase in engine RPM before the Electronic
Speed Control disengages is normal.

Vehicles equipped with manual transmissions may need
to be shifted into a lower gear to climb hills without
speed loss.

To Accelerate For Passing

Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.

Using Electronic Speed Control On Hills

NOTE:

The Electronic Speed Control system maintains

speed, up and down hills. A slight speed change on
moderate hills is normal.

On steep hills, a greater speed loss or gain may occur so
it may be preferable to drive without Electronic Speed
Control.

WARNING!

Electronic Speed Control can be dangerous where the
system cannot maintain a constant speed. Your ve-
hicle could go too fast for the conditions, and you
could lose control and have an accident. Do not use
Electronic Speed Control in heavy traffic or on roads
that are winding, icy, snow-covered or slippery.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

165

This manual is related to the following products: