Jacking and tire changing, Jack location, Spare tire removal – Dodge 2011 Grand_Caravan - User Guide User Manual
Page 65: To access spare tire winch drive nut, What to do in emergencies
JACKING AND TIRE CHANGING
Jack Location
• The jack, jack handle and winch handle tools are stowed behind the rear left side
trim panel in the rear cargo area. Turn the two cover latches to release the cover.
• Remove the pouch containing the
scissors jack, jack handle, and tools.
Spare Tire Removal
• The spare tire is stowed inside a
protective cover located under the
center of the vehicle between the front
doors by means of a cable winch
mechanism. The “spare tire drive” nut
is located on the floor, under a plastic
cap at the front of the floor console.
• The tool pouch contains three pieces and can be assembled into a spare tire hook;
to remove the compact spare tire/cover assembly from under the vehicle, or a
Winch T-handle; to raise/lower the compact spare tire/cover assembly.
To Access Spare Tire Winch Drive Nut
• To access the spare tire winch drive nut and lower the spare tire, you will need to
refer to one of the following center console configurations.
Super Console
• For vehicles equipped with the Super Console, the spare tire winch assembly drive
nut is located beneath the console.
1. Pull the lower drawer out from the
rear of the floor console.
2. Open the front drawer to expose the
storage compartment.
3. Remove the liner from the console's
storage compartment to access the
spare tire winch drive nut.
WHAT TO DO IN EMERGENCIES
63