Dodge 2010 Charger_SRT - User Guide - Manual (Page 40)

BRAKE/TRANSMISSION
INTERLOCK MANUAL
OVERRIDE
• The manual override may be used in
the event that the shift lever should
fail to move from PARK with the Key
Fob in the ON position and the brake
pedal pressed.
• To operate the shift lock manual
override, perform the following steps:
• Remove the rubber tray from the
storage bin located to the right of
the shift lever. The override access
port is at the top of the bin to the
right of the shift lever gate.
• Turn the ignition switch to the ACC
or ON position without starting the
engine.
• Firmly set the parking brake.
• Press and maintain firm pressure
on the brake pedal.
• Using a screwdriver, press and
hold the override tab through the
access port on the center console.
• Move the shift lever into the
NEUTRAL position and start the
vehicle.
• Reinstall the override cover.
• Have your vehicle inspected by your
local authorized dealer if the shift
lock manual override has been used.
UTILITY
38