beautypg.com

Trip functions – Dodge 2010 Grand Caravan - Owner Manual User Manual

Page 249

background image

after a single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty-cycle based, which means the
engine oil change interval may fluctuate dependent upon
your personal driving style.

Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the Menu button. To reset the oil change indicator
system (after performing the scheduled maintenance)
perform the following steps.

1. Turn the ignition switch to the ON position (do not
start the engine).

2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.

3. Turn the ignition switch to the OFF/LOCK position.

NOTE:

If the indicator message illuminates when you

start the engine, the oil change indicator system did not
reset. If necessary, repeat these steps.

Trip Functions

Press and release the MENU button until one of the
following Trip Functions displays in the EVIC.

Press the STEP button to scroll through all the Trip
Computer functions.

The Trip Functions mode displays the following informa-
tion.

Average Fuel Economy
Shows the average fuel economy since the last reset.
When the fuel economy is reset, the display will read
“RESET” or show dashes for two seconds. Then, the
history information will be erased, and the averaging will
continue from the last fuel average reading before the
reset.

248

UNDERSTANDING YOUR INSTRUMENT PANEL