Dodge 2009 Challenger - Quick Reference Guide - Manual (Page 10)

sPeeD Control lever
CRUisE ON/OFF
• Push the ON/OFF button to activate the Speed Control.
• The Speed Control symbol
will appear on the instrument cluster
to indicate the speed Control is on.
• Push the ON/OFF button a second time to turn the system off.
sET
• With Speed Control on, press down and release the lever to set a
desired speed.
aCCEL/DECEL
• Press and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
CaNCEL
• Pull the lever toward you, or apply the brakes to cancel the set
speed and maintain the set speed memory.
• Push the ON/OFF button to turn the system off and erase the set
speed memory.
REsUME
• To resume a previously selected set speed in memory, push the
lever up and release.
Push ON/OFF
Button
Mist (Push
to First Detent)
175469_09_Challenger_QRG_102008.indd 11 4/24/09 1:25:24 PM