Dodge 2009 Caliber - Quick Reference Guide - Manual (Page 10)

speed COntrOl lever
CRUisE ON/OFF
• Push the ON/OFF button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the
speed Control is on.
• Push the ON/OFF button a second time to turn the system off.
sET
• With Speed Control on, press down and release the lever to set a
desired speed.
ACCEL/DECEL
• Press and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
CANCEL
• Pull the lever toward you, or apply the brakes to cancel the set
speed and maintain the set speed memory.
• Push the ON/OFF button to turn the system off and erase the set
speed memory.
REsUME
• To resume a previously selected set speed in memory, push the
lever up and release.
Push on/oFF
Button
175471_09a_Caliber_QRG_111308.indd 11 4/24/09 1:34:51 PM