Troubleshooting – Cambridge Audio INCOGNITO LK10 User Manual

Page 18

Troubleshooting

If the LK10 becomes locked and/or ‘ERROR’ appears on the display due to a power interruption or
during cloning, follow these steps:

1. Unplug the power to the system and plug back in after one minute.
2. When the power resumes, the LK10 will display distorted text.
3. Clone the LR10 to the LK10 without entering Learn mode.
4. When the LR10 has finished sending, repeat Step 1.

Note: Time and date will not be updated in the LK10.

Important: LK10 will only operate when connected to KP10 as part of a complete AH10 hub-based
system. It is not compatible with ‘Incognito Ready’ amplifiers.

Visit www.cambridge-audio.com and register to receive notification of future hardware and software releases.

This guide is designed to make installing and using this product as easy as possible. Information in this document
has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of
continuous improvement, therefore design and specifications are subject to change without prior notice. If you notice
any errors please feel free to email us at: [email protected]

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual
may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the
manufacturer. All trademarks and registered trademarks are the property of their respective owners.

A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia. This product may be
covered by one of more of the following patents: US 7,181,023, 6,389,139, EP 1004222, AU 739808, NZ 502982,
Mexico Z41196, Canada CA2301062.