Hella 3 LED DRL - Manual (Page 8)

8
ENGLISH GB
Determine the installation position
and mark the fastening points.
Pre-drill using a 3 mm drill bit and
drill out to 8,5 mm.
Seal drilled metal parts with rust
protection agent.
Electrical connection
Page 3
Lay and connect the cables in
accordance with the connection
diagram.
According to the connection
diagram, the daytime running
lights are switched on automatically
with the ignition.
Caution!
Daytime running lights
• are not a substitute for low beam
at dawn/dusk or during darkness.
• they shine only when the vehicle
lighting is switched off and the
ignition is switched on.
• they switch off automatically when
switching on the vehicle lighting.
• are approved in accordance
with ECE R87.
• may be fitted in accordance
with EC Directive EC R97/28
and ECE R48.
We recommend that the
installation instructions are
carried along with the vehicle
documentation.
Installation
Page 4
1.500
mm
max.
400mm
max. 600mm
min.
350mm
min.