Windshield wiper and washer switch – NISSAN 2015 Versa Sedan - Quick Reference Guide User Manual
Page 11

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
9
WINDSHIELD WIPER
AND WASHER SWITCH
Move the lever to the following positions to
operate the windshield wipers:
1
Mist (MIST) – One sweep operation of
the wipers.
2
Intermittent (INT) – Move the lever down to
the intermittent position and then rotate the
time control ring
3
to increase or decrease
wiper speeds (if so equipped).
4
Low (LO) – Wipers operate at a continuous
low-speed.
5
High (HI) – Wipers operate at a continuous
high-speed.
6
Washer
– Pull the lever toward you to activate the washer. The wipers will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
3
1
2
4
5
MIST
OFF
INT
LO
HI
6
HIGH BEAM SELECT
Push the headlight control switch forward
3
to select the high beam function. The blue
indicator light
illuminates in the instrument
panel. Pull the headlight switch back to the
original position to select the low beam. The
blue indicator light will extinguish.
Pull and release the headlight control switch
4
to flash the headlight high beams on and off.
FOG LIGHT SWITCH (if so equipped)
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
5
to turn the fog lights on.
Turn the switch (inside collar) to the OFF
position to turn the fog lights off.
LANE CHANGE SIGNAL
To signal a lane change, move the lever up or
down to the point where the indicator light
begins to flash, but the lever does not latch.
The turn signal will flash three times automatically.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
3
4
5
1804921_15c_Versa_Sedan_QRG_080714.indd 9
8/7/14 2:22 PM