NISSAN 2013 Versa Sedan - Quick Reference Guide - Manual (Page 8)

STarTiNG/SToPPiNG THe eNGiNe
STARTinG THe enGine
cOnTinuOuSLY VARiABLe TRAnSMiSSiOn
(niSSAn intelligent key
® models only - if so equipped)
Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the Acc mode.
• If the ignition is pushed a second time, the vehicle
will enter the On mode.
Move the shift lever to P (ParK).
Push the ignition switch to start or stop the engine.
NOTE: It is important to make sure the Intelligent Key is with you (that is, in your pocket or purse).
MAnuAL TRAnSMiSSiOn (if so equipped)
Depress the brake pedal.
Move the shift lever to N (NeuTral).
depress the clutch pedal to the floor.
Turn the ignition switch to STarT.
TuRninG THe enGine Off
For a Continuously Variable Transmission (NISSAN Intelligent Key ® models only - if so
equipped), apply the brake pedal, move the shift lever to the P (ParK) position, apply the
parking brake and push the ignition STarT/SToP switch to turn the engine off.
For a manual transmission, apply the brake pedal, place the vehicle in 1st gear, apply the
parking brake and turn the ignition switch to the loCK position.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
6
first drive features
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi