NISSAN 2014 Versa Note - Owner's Manual - Manual (Page 333)

Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely
onto the valve stem. Do not press too
hard or force the valve stem side-
ways, or air will escape. If the hissing
sound of air escaping from the tire is
heard while checking the pressure,
reposition the gauge to eliminate this
leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge
stem and compare to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as needed. If too
much air is added, press the core of
the valve stem briefly with the tip of
the gauge stem to release pressure.
Recheck the pressure and add or
release air as needed.
6. Install the valve stem cap.
7. Check the pressure of all other tires,
including the spare.
For USA market use the fallowing pres-
sures:
Size Cold Tire Inflation
Pressure
Front Original Tire:
P185/65R15
P195/55R16
250 kPa, 36 PSI
Rear Original Tire:
P185/65R15
P195/55R16
250 kPa, 36 PSI
T125/70D15 420 kPa, 60 PSI
For CANADA market use the following
pressures:
Size Cold Tire Inflation
Pressure
Front Original Tire:
P185/65R15
P195/55R16
250 kPa, 36 PSI
Rear Original Tire:
P185/65R15
P195/55R16
250 kPa, 36 PSI
T125/70D15 420 kPa, 60 PSI
LDI0393
8-32 Maintenance and do-it-yourself