First drive features, Starting/stopping the engine, Outside mirror control switch – NISSAN 2013 Sentra - Quick Reference Guide User Manual

Page 8: Seat adjustments

STarTiNG/SToPPiNG THe eNGiNe

cONTINUOUSLY VARIABLE TRANSMISSION
(NISSAN Intelligent key

models only - if so equipped)

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the

ignition switch once enters the aCC mode.

• If the ignition switch is pushed a second time the

vehicle will enter the oN mode.

Move the shift lever to the P (ParK) position.
Push the ignition switch to start the engine.
NOTE: It is important to make sure the Intelligent key is with you (that is, in your pocket or purse).

MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to the N (NeuTral) position.
Depress the clutch pedal to the floor.
Press the ignition switch.

ouTSiDe Mirror CoNTrol SWiTCH

Move switch

right or left to select the right

or left side mirror.
Adjust each mirror to the desired position using the
switch

Move the switch

to the middle “neutral”

position to prevent accidentally moving the mirror.

For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

SeaT aDJuSTMeNTS

To slide the front seat forward or backward, pull
up on the center of the bar

under the front of the

seat and slide forward or backward. Release the
bar to lock the seat in position.

To recline the seatback, pull up on the lever

and

lean back. To bring the seatback forward, pull the
lever up and lean your body forward. Release the
lever to lock the seatback in position.
SEAT LIFTER
To adjust the seat height, pull up or push down on the adjusting lever

repeatedly.

For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your

Owner’s Manual.

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

first drive features