Starting/stopping the engine, Outside mirror control switch (if so equipped), Seat adjustments – NISSAN 2012 Sentra - Quick Reference Guide User Manual

Page 7

STarTiNG/SToPPiNG THe eNGiNe

cOnTinuOuSLY VARiABLe TRAnSMiSSiOn
(niSSAn intelligent key

models only - if so equipped)

Depress the brake pedal.

Push the ignition switch

in and turn clockwise

until the intelligent key system warning light is

illuminated green.

Turn the ignition switch

to start the engine.

nOTe: it is important to make sure the intelligent key is
with you (that is, in your pocket or purse).

ouTSiDe Mirror coNTrol SwiTcH (if so equipped)

Turn the control switch right or left to select the right
or left side mirror.

Move the control switch up, down, right or left to

adjust the mirror angle.

Turn and set the switch to the middle “neutral”
position to prevent accidentally moving the mirror.

for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.

SeaT aDJuSTMeNTS

To slide the front seat forward or backward, pull up
on the lever

under the front of the seat and slide

forward or backward. Release the lever to lock the
seat in position.

To recline the seatback, pull up on the lever

and

lean back. To bring the seatback forward, pull the
lever up and lean your body forward. Release the
lever to lock the seatback in position.

SeAT LifTeR (if so equipped for driver’s seat)

To adjust the seat height, pull up or push down on
the adjusting lever

repeatedly.

for more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.