Starting/stopping the engine, Headlight control switch – NISSAN 2011 Sentra - Quick Reference Guide User Manual
Page 7

5
STarTiNG/SToPPiNG THe eNGiNe
cOnTinuOuSLY VARiABLe TRAnSMiSSiOn
(niSSAn intelligent key™ models only - if so equipped)
depress the brake pedal.
Push the ignition switch
01
in and turn until the
intelligent key System warning light is
illuminated green.
Turn the ignition switch
01
to start the engine.
nOTe: it is important to make sure the intelligent key is
with you (that is, in your pocket or purse).
MAnuAL TRAnSMiSSiOn (if so equipped)
depress the brake pedal.
Move the shift lever to n (neutral).
depress the clutch pedal to the floor.
Turn the ignition switch
02
to STarT.
TuRninG THe enGine Off
for a continuously Variable Transmission, move the shift lever to the P (PARk) position, apply
the parking brake and turn the ignition switch to the locK position.
for a manual transmission, apply the foot brake, place the vehicle in first gear, apply the parking
brake and turn the ignition switch to the locK position.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
HeaDliGHT coNTrol SwiTcH
Turn the headlight control switch
01
to the
position to turn on the front parking, tail, license
plate and instrument panel lights.
Turn the switch
01
to the
position to turn on
the headlights.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
01
02
01