NISSAN 2015 Rogue - Quick Reference Guide - Manual (Page 22)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 20
SYSTEM GUIDE
VEHICLE INFORMATION DISPLAY
The vehicle information display 1 displays such items as:
Vehicle settings
Trip computer information
Drive system warnings and settings
(if so equipped)
Audio information
Navigation turn-by-turn
Cruise control system information
NISSAN Intelligent Key
®
operation information
Indicators and warnings
Tire pressure information
USING THE VEHICLE INFORMATION DISPLAY
The vehicle information display can be changed using
the
button 2 and the ENTER buttons 3
located on the steering wheel.
Press
2 to change the display mode.
Move the switch 3 up or down to navigate
through the vehicle information display menu.
Press ENTER 4 to change or select an item.
Press 5 to go back to the previous menu.
STARTUP DISPLAY
When the ignition is in the ON position, the vehicle
information display will support four of the
following modes:
Active system status (if so equipped)
Fuel economy
Trip computer Warnings (if there are any)
Tire pressure information
RESETTING THE TRIP COMPUTER
1. Press the
button 2 until you reach the trip computer mode.
2. Press the button 2 for more than 1.5 seconds to reset fuel consumption, average
speed, distance to empty and journey time.
3. Pushing the TRIP RESET switch 6 for more than 1 second resets the currently
displayed trip odometer to zero.
SETTINGS
The setting mode allows you to change the information displayed in the vehicle
information display:
Driver Assistance
Tire Pressures Meter Settings
Unit Vehicle Settings Language
Maintenance Factory Reset Alerts
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
5
3
2
4
6
1
1758972_15b_Rogue_QRG_082614.indd 20 8/26/14 1:08 PM