Headlight control switch, Windshield wiper switch – NISSAN 2011 Rogue - Quick Reference Guide User Manual
Page 7

5
STarTiNG/SToPPiNG THe eNGiNe (NiSSaN intelligent Key™
models only)
depress the brake pedal.
Push the ignition switch in.
confirm the intelligent key system warning light is
illuminated green.
Turn the ignition switch to STarT.
TuRninG THe enGine Off
Move the shift lever to the P (PARk) position, apply
the parking brake and turn the ignition switch to the
locK position.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
HeaDliGHT coNTrol SwiTcH
Turn the headlight control switch
01
to the
position to turn on the front parking, side marker, tail,
license plate and instrument panel lights.
Turn the switch
01
to the
position to turn on
the headlights.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
wiNDSHielD wiPer SwiTcH
Move the lever to the following positions to operate
the windshield wipers:
01
intermittent (iNT) - front wipers operate
intermittently.
02
Low (lo) - front wipers operate at a continuous
low-speed.
03
High (Hi) - front wipers operate at a continuous
high-speed.
04
Rear Wiper (rear) – Twist the end of the
lever to operate the first (iNT) or second (oN)
speed settings for the rear wiper.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
01
04
01
02
03