NISSAN 2014 Pathfinder Hybrid - First Responder's Guide - Manual (Page 13)

No. Component Location Description
➊ DC/DC Converter Cargo area floor
(mounted right of
Li-ion battery) The DC/DC converter reduces the voltage of
the Li-ion battery to provide power to the 12V
battery in order to operate the vehicle’s electric
components (headlights, audio system, etc.).
➋ Service Plug Cargo area floor
(inside storage bin
behind access door) This is used to disable the high voltage system.
➌ Lithium-ion (Li-ion)
Battery Cargo area floor
(under 3rd row
seating floor trim) The Li-ion battery stores and outputs DC
power (Maximum voltage 144V) needed to
propel the vehicle.
➍ Traction Motor Engine compart-
ment (built-into the
transmission) Converts three-phase alternating current (AC)
power to drive power (torque) which propels
the vehicle.
➎ Traction Motor
Inverter Engine compart-
ment (front driver
side) Converts the DC power stored in the Li-ion
battery to three-phase AC power and controls
motor torque (revolution) by regulating the
motor current. The inverter has a built in high
voltage capacitor.
➅ 12V Battery Engine compart-
ment (front driver
side) A lead-acid battery that supplies power to the
low voltage devices.
➐ High Voltage Har-
ness Cargo area (on
Li-ion battery),
under floor, engine
compartment Orange-colored power cables carry high DC
voltage between each of the high voltage com-
ponents.
2-3 Li-ion Battery Pack Specifications
Li-ion Battery Specifications
Li-ion battery voltage 144V
Number of Li-ion battery modules in the pack 3 modules (40 cells)
Li-ion battery module voltage 48V each
Li-ion battery dimensions 36.31 x 22.07 x 6.52 in. (922.3 x 560.5 x 165.6
mm)
Li-ion battery weight 62.4 lbs (28.3 kg)
FRG–13