NISSAN 2014 Pathfinder Hybrid - Owner's Manual User Manual
Page 51

1. Locate the fusible link box behind the engine
air cleaner.
2. Push the tab in and lift up
᭺
A
to remove the
lid and expose the remote positive battery
terminal
᭺
B
.
3. If the booster battery is in another vehicle
position the two vehicles to bring their bat-
teries near each other.
Do not allow the two vehicles to touch.
4. Apply the parking brake. Move the shift lever
to P (Park). Switch off all unnecessary elec-
trical systems (lights, heater, air conditioner,
etc.).
5. Remove vent caps on the battery (if so
equipped) of the vehicle with battery for
booster. Cover the battery with an old
cloth
᭺
F
to reduce explosion hazard.
6. Connect jumper cables in the sequence il-
lustrated (
᭺
B
,
᭺
C
,
᭺
D
,
᭺
E
).
CAUTION
● Always connect positive (ϩ) to positive
(
ϩ) and negative (Ϫ) to body ground (for
example, strut mounting bolt, engine
lift bracket, etc.) — not to the battery.
● Make sure the jumper cables do not
touch moving parts in the engine com-
partment and that the cable clamps do
not contact any other metal.
● Do not keep the starter motor engaged
for more than 10 seconds. If the engine
does not start right away, place the ig-
nition switch in the OFF position and
wait 10 seconds.
7. Start the engine of the booster vehicle and
let it run for a few minutes.
8. Hold down the brake pedal and press the
START button. The vehicle instruments and
gauges will light up, and the green
ЉREADYЉ
light will come ON.
LCE2105
6-4
In case of emergency