NISSAN 2015 Murano - Quick Reference Guide - Manual (Page 22)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 20
INTELLIGENT CRUISE CONTROL (ICC) SYSTEM (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode, press the CRUISE ON/OFF button
1 . The CRUISE indicator light 2
will illuminate.
Accelerate to the desired speed.
Push down on the SET/- switch
3
and release
it. Intelligent Cruise Control will be set to the
desired speed.
Press the distance button 4
repeatedly to
change the set distance between long, middle
and short.
When a vehicle is not detected ahead of you in
the lane, the set distance and set vehicle speed
indicator lights will illuminate
5
in set mode.
When a vehicle is detected ahead of you in the lane, the vehicle
ahead detection, set distance and set vehicle speed indicator lights
will illuminate
6
in set mode.
To reset at a faster cruising speed, push and hold the RES/+
switch 7 . When the vehicle attains the desired speed, release
the switch.
To reset at a slower cruising speed, push and hold the
SET/- switch 3 . Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 8
or tap the brake pedal. The
set vehicle speed indicator 5
will extinguish.
To turn off Intelligent Cruise Control, press the CRUISE ON/OFF button 1 . The
CRUISE indicator light 2
in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
When one of the two cruise modes is in use, you must press and hold the CRUISE
ON/OFF button 1 for longer than 1 second to activate conventional Cruise Control
and the Intelligent Cruise Control light will extinguish.
Accelerate to the desired speed.
Push down on the SET/- switch and release it. The SET indicator light will illuminate.
Cruise Control should be set to the desired speed.
To switch between the two Cruise Control modes:
When one of the two cruise modes is in use, you must press and hold the CRUISE
ON/OFF button 1 for longer than 1 second to activate conventional Cruise Control.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
2
5
6
FIRST DRIVE FEATURES
1
4
8
7
3
1705374_15a_Murano_QRG_091214b.indd 20 9/12/14 10:46 AM