NISSAN 2013 Murano - Owner's Manual - Manual (Page 405)

Black plate (403,1)
[ Edit: 2012/ 7/ 31 Model: Z51-D ]
SCE0868
2. Take the hose *
1 and the power plug *
2
out of the air compressor. Remove the cap
of the bottle holder from the air compressor.
SCE0869
3. Remove the cap from the tire sealant bottle,
and screw the bottle clockwise onto the
bottle holder. (Leave the bottle seal intact.
Screwing the bottle onto the bottle holder
will pierce the seal of the bottle.)
4. Remove the cap from the tire valve on the
flat tire.
SCE0870
5. Remove the protective cap *
A of the hose
and screw the hose securely onto the tire
valve. Make sure that the pressure release
valve
*
B is securely tightened. Make sure
that the air compressor switch is in the OFF
(*) position, and then insert its power plug
into the power outlet in the vehicle.
In case of emergency 6-13
Condition: