NISSAN 2013 Maxima - Quick Reference Guide - Manual (Page 9)

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
7
startinG/stoPPinG thE EnGinE
Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the aCC mode.
• If the ignition is pushed a second time, the vehicle
will enter the on mode.
Press the ignition switch start/stoP button to
start the engine.
NOTE: It is important to make sure the NISSAN Intelligent key
® is with you (that is, in your pocket
or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (Park) position and apply the parking brake.
Press the ignition switch start/stoP button to turn the engine off.
For more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.
hEaDliGht Control sWitCh
HEADLIGHT cONTROL
Turn the headlight control switch to the
position 01
to turn on the front parking, tail, license
plate and instrument panel lights. Turn the switch to
the position
02
to turn on the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when it
is light. The system will keep the headlights on for a period of time after you turn the ignition
off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the auto position
03
then turn the ignition switch to on. To deactivate the autolight system, turn the headlight
control switch to the off, 01
or position
02
.
HIGH BEAM SELEcT
Push the headlight control switch forward
04
to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight control switch back to the original
position to select the low beam. The blue indicator
light goes off.
Pull and release the headlight control switch
05
to flash the headlight high beams on and off.
01
03
02
04
05
1351487_13b_Maxima_QRG_010813b.indd 7 1/8/13 2:13 PM