2.1 reset procedure, 3 towing, 3.1 vehicle specifications – NISSAN 2013 LEAF - Roadside Assistance Guide User Manual
Page 20: 2.1. reset procedure, 3.1. vehicle specifications
Cabin Fuse Box Location
NOTE:
Insert a screwdriver wrapped with a protective cloth (A) into the slit (1). Pull to remove the fuse
box cover (2). Remove the fuse with the fuse puller (3).
7. Release the parking brake.
8. Turn the power switch OFF.
9. Release brake pedal.
To avoid possible personal injury or vehicle damage, use wheel chocks or take appropriate
steps to prevent the vehicle from rolling freely.
Be sure to firmly position wheel chocks when P (Park) position is manually released.
4-2.1 Reset Procedure
1. Install the 2 fuses removed previously.
2. Turn the power switch ON and wait 5 seconds without pressing the brake pedal. Ensure selector
lever is in the N (neutral) position.
3. If 12V battery is low voltage, please charge with battery charger.
4. Turn the power switch OFF and wait 5 seconds.
4-3 Towing
4-3.1 Vehicle Specifications
Length
175 in. (4,445 mm)
Width
69.7 in. (1,770 mm)
Overall Height
61.0 in. (1,550 mm)
Wheel Base
106.3 in. (2,700 mm)
Minimum ground clearance
6.3 in. (160 mm)
Overall vehicle weight
3,256-3,346 lbs. (1,477-1,518 kg) (Weight varies
by equipment and trim level.)
UP
METER 1
10A
1
1
3
2
A
AAYIA0151ZZ
20