NISSAN 2011 LEAF - First Responder's Guide - Manual (Page 13)

3-1 Preparation Items
Preparation Items Specification Purpose
PPE (personal protective
equipment):
Insulated gloves
Up to 1,000V
For protection from high voltage electri-
cal shock
Insulated shoes
–
Safety shield
–
Wrenches Size:10mm
To remove the service plug access
cover bolts.
To remove the 12V battery terminal bolt.
S olvent resistant protection
gloves
Solvent resistant protection
shoes
–
To utilize in the event of a Li-ion battery
electrolytic solution leak.
–
Absorbent pad The same pad used for internal com-
bustion engine fluids can be used. To absorb any Li-ion battery electrolytic
solution leakage.
Standard fire fighting
equipment Standard fire fighting equipment
Depending on type of fire (vehicle or
battery) use standard fire fighting
equipment (water or extinguisher). To extinguish a fire.
Insulated tape Insulating
To cover any damaged harnesses to
protect from and prevent electrical
shock. Tape should cover all bare or
damaged wire.
13