NISSAN 2013 Cube - Quick Reference Guide - Manual (Page 14)

CruISe CONTrOL
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25
MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the CruISe
ON/OFF switch 01
. The CruISe indicator light
in the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push the COaST/SeT switch
02
and release. Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the aCCeL/reS switch 03
. When
the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COaST/SeT switch 02
. Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CaNCeL switch 04 .
To turn off cruise control, push the CruISe ON/OFF switch 01
. The CruISe indicator
light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
uSB/iPOD ® INTerFaCe (if so equipped)
The USB jack 01
is located on the instrument panel
in front of the shift lever.
When a compatible USB memory device or iPod
® is
plugged into the USB jack 01
, compatible audio
files stored on the device can be played
through the vehicle’s audio system.
For more information, refer to the “Center display, heater, air
conditioner, audio and phone systems (section 4)”
of your Owner’s Manual.
04
03
02
01
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 12
first drive features
01
1221378_13a_Cube_QRG_092112.indd 20 10/2/12 9:26 AM