Starting/stopping the engine, Headlight control switch – NISSAN 2011 Cube - Quick Reference Guide User Manual

Page 7

STarTING/STOPPING THe eNGINe

cOnTinuOuSLY VARiABLe TRAnSMiSSiOn
(niSSAn intelligent key™ models only - if so equipped)

depress the brake pedal.

Move the shift lever to P (PARk).

Push the ignition switch to start the engine.

nOTe: it is important to make sure the niSSAn key is
with you (that is, in your pocket or purse).

TuRninG THe enGine Off

Move the shift lever to the P (PARk) position, apply
the parking brake and push the ignition switch.

PuSH BuTTOn eMeRGencY enGine SHuT Off

To shut off the engine in an emergency situation while driving, perform one of the following procedures:

Rapidly push the push button ignition switch 3 consecutive times, or

Push and hold the push button ignition switch for more than 2 seconds.

MAnuAL TRAnSMiSSiOn (if so equipped)

depress the brake pedal.

Move the shift lever to n (neutral).

depress the clutch pedal to the floor.

Turn the ignition switch to start the engine.

TuRninG THe enGine Off

Apply the foot brake and place the vehicle in first gear, then apply the parking brake and turn
the ignition switch to Off.

for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

HeaDLIGHT CONTrOL SwITCH

Turn the headlight control switch

to the

position to turn on the front parking, side marker, tail,
license plate and instrument panel lights.

Turn the switch

to the

position to turn on

the headlights.

fOG LiGHT OPeRATiOn (if so equipped)

The headlights must be on and the low beams selected for the fog lights to operate.

Turn the switch (inside collar)

to the

position to turn on the fog lights.

Turn the switch (inside collar)

to the OFF position to turn off the fog lights.

for more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.