NISSAN 2009 Altima Hybrid - Dismantling Guide - Manual (Page 22)

22. Disconnect the electrical connectors (1) from the EPS
DC/DC converter (2).
23. Remove the harness clips and harness from the HV
battery.
24. Disconnect the vent hose (3) from the vehicle.
25. Remove the HV battery bolts (1) from the HV battery (2).
26. Remove the HV battery from the vehicle.
27. Remove the HV battery blower motor bolts (1) and duct
clips (2), then remove the HV battery blower motor (3)
and ducts (4) from the HV battery.
28. Remove the EPS DC/DC converter nuts (1), then
remove the EPS DC/DC converter (2) from the HV
battery (3).
Removal of HV Components
Dismantling the remainder of the Nissan Altima Hybrid may be performed like conventional Nissan vehicles
once the HV system is disabled.
- 22 -