Automatic air conditioner (type a) -26 – NISSAN 2015 370Z Roadster - Owner's Manual User Manual
Page 185

4-26
Center display, heater, air conditioner, audio, phone and voice recognition systems
SAA2277
1.
“
” fan speed control dial
2.
Temperature control dial*
* The display of degrees:
“60-75-90” is used for
8F (US).
“18-25-32” is used for
8C (Canada).
3.
Air flow control dial
4.
“A/C” air conditioner button
5.
Intake air control button (“
” outside air and
“
” air recirculation)
6.
“
” rear window defroster button (See “Rear
window defroster switch” (P.2-32).)
AUTOMATIC AIR CONDITIONER (Type
A)
Automatic operation
Cooling and/or dehumidified heating
(AUTO):
This mode may be used all year round. The
system works automatically to control the inside
temperature, air flow distribution and fan speed
after the preferred temperature is set manually.
1. Turn the “
” fan speed control dial and air
flow control dial to the “AUTO” position. The
air conditioner will automatically turn on.
2. Turn the temperature control dial to set the
desired temperature.
. The temperature can be set within the
following range.
— For U.S.: 60 to 90
8F (16 to 328C)
— For Canada: 64 to 90
8F (18 to 328C)
. The temperature of the passenger compart-
ment will be maintained automatically. Air
flow distribution and fan speed are also
controlled automatically.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Dehumidified defrosting or defogging:
1. Turn the “
” fan speed control dial to the
desired position.
2. Turn the air flow control dial to the “
”
position.
3. Turn the temperature control dial to set the
desired temperature.
.
To quickly remove ice from the outside of
the windows, turn the “
” fan speed
control dial to the maximum position.
.
As soon as possible after the windshield
is clean, turn the air flow control dial to
the “AUTO” position to return to the auto
mode.
.
When the air flow control dial is turned to
the “
” or “
” position, the air