FORD 2000 F-550 v.1 - Manual (Page 225)

fluid that indicates dual usage (MERCON
௡ and MERCON௡ V) in
an automatic transmission application requiring MERCON
௡ may
cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.
5 Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
6 Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with an in-tank cooler. The
amount of transmission fluid and fluid level should be set by the
indication on the dipstick’s normal operating range.
LUBRICANT SPECIFICATIONS
Item
Ford part name
or equivalent Ford part
number Ford
specification
Front axle
(4X4)
Motorcraft SAE
75W-90 Premium
4x4 Front Axle
Lubricant XY-75W90-TQL WSP-M2C201-A
Rear axle
Motorcraft SAE
75W-140 High
Performance
Synthetic Rear
Axle Lube
1
F1TZ-19580-B WSL-M2C192-A
Motorcraft SAE
80W-90 Premium
Rear Axle
Lubricant (Dana
135 axles)
1
XY-80W90-QL WSP-M2C197-A
Brake fluid
and clutch
fluid (if
equipped) High Performance
DOT 3 Motor
Vehicle Brake
Fluid C6AZ-19542-AB ESA-M6C25-A
and DOT 3
Engine coolant Ford Premium
Engine Coolant
E2FZ-19549-AA
(in Canada,
Motorcraft
CXC-8-B) ESE-M97B44-A
Capacities and specifications
225