beautypg.com

Maintenance and care – FORD 2001 Windstar User Manual

Page 248

background image

3. Remove bulb socket by turning it
counterclockwise, then slide it out
of the lamp assembly.

4. Carefully pull bulb straight out of
the socket and push in the new
bulb.

5. To complete installation, follow
removal procedure in the reverse
order.

Replacing tail lamp/backup/turn lamp bulbs

1. Open the liftgate to expose the
tail lamp assemblies.

2. Remove the two screws from the
lamp assembly.

3. Carefully remove the lamp
assembly by pulling it rearward
about 45 degrees.

4. Rotate bulb socket
counterclockwise and remove from
lamp assembly.

5. Pull bulb straight out of socket and push in new bulb.

6. To complete installation, follow the removal procedure in the reverse
order.

Maintenance and care

248