beautypg.com

Seating and safety restraints – FORD 2001 F-550 v.1 User Manual

Page 118

background image

Tether strap attachment

1. Position the child safety seat on the seat cushion.

2. Route the child safety seat tether strap over the back of the seat.

3. Locate the correct anchor for the selected seating position.

4. You may need to pull the seatback forward to access the tether
anchors. Make sure the seat is locked in the upright position before
installing the child seat. Refer to the Folding Down The Rear Seats
section in this chapter for information on how to operate the rear seats.

5. Clip the tether strap to the anchor as shown.
• Front seat (SuperCab only)

• Front seats (Regular Cab) and

Rear seats (Crew Cab only)

If the tether strap is clipped incorrectly, the child safety seat
may not be retained properly in the event of a collision.

6. Refer to the Installing child safety seats in combination lap and
shoulder belt seating positions
section of this chapter for further
instructions to secure the child safety seat.

7. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.

Seating and safety restraints

118

This manual is related to the following products: