FORD 2001 Excursion v.2 - Manual (Page 133)

• uses hub locks that can be engaged and disengaged automatically by
using a rotary control located on the instrument panel.
• automatic hub locks can be
manually overridden by rotating
the hub lock control from AUTO
to LOCK. Automatic operation of
the hub locks is recommended.
• For proper operation, make
sure that the arrow and the
indicator dot on the hub are
aligned.
4WD system indicator lights
The 4WD system indicator lights illuminate only under the following
conditions. If these lights illuminate when driving in 2WD, contact your
Ford dealer as soon as possible.
• 4x4 -momentarily illuminates
when the vehicle is started.
Illuminates after 4x4 High or 4x4
LOW is engaged.
• LOW RANGE –momentarily
illuminates after the vehicle is
started. Illuminates when 4x4
Low is engaged.
Using the electronic shift 4WD system
Positions of the electronic shift system
To prevent damage, the electronic shift 4WD system is designed
to allow up to 45 seconds before the shift command is performed.
In the event that conflicting shift commands are selected, allow
up to 45 seconds for the shift command to be performed prior to
reporting any shift concerns to your dealer.
2WD (2WD High) – Power to rear axle only.
4x4
LOW
RANGE
Driving
133