beautypg.com

Driving, Brake – FORD 2002 F-550 v.2 User Manual

Page 135

background image

Parking brake

Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.

The BRAKE warning lamp in the
instrument cluster illuminates and
remains illuminated (when the
ignition is turned ON) until the
parking brake is released.

Always set the parking brake fully and make sure that the
gearshift is securely latched in P (Park) (automatic

transmission) or in 1 (First) (manual transmission).

The parking brake is not recommended to stop a moving vehicle.
However, if the normal brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Since the parking brake applies only the
rear brakes, the vehicle’s stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.

Pull the release lever to release the
brake. Driving with the parking
brake on will cause the brakes to
wear out quickly and reduce fuel
economy.

!

BRAKE

PULL

Driving

135

This manual is related to the following products: