beautypg.com

Cleaning – FORD 2002 F-550 v.1 User Manual

Page 241

background image

Never spray a hot engine with cold water, as damage to the

engine block or engine components may occur.

• Use caution when using a self-serve power washer (1000psi maximum

pressure) to clean the engine, as the high-pressure fluid could
penetrate the sealed parts and cause damage.

Never apply anything to any exposed belts in the engine

compartment, including the belt dressing.

For general cleaning of the engine and engine compartment, spray
Engine Shampoo and Degreaser (F4AZ-19A536–A) on all parts that
require cleaning and pressure rinse the area with cool water.

• Cover the highlighted areas to prevent water damage when cleaning

the engine.

Never wash or rinse the engine while it is running; water in the

running engine may cause internal damage.

WASHING NON-PAINTED PLASTIC EXTERIOR PARTS

Use Detail Wash (ZC-3–A) for routine cleaning.

If tar or grease spots are present, clean with Extra Strength Tar and
Road Oil Removal (B7A-19520–AA).

Use only approved products to clean plastic parts. These products
are available from your authorized Ford, Lincoln or Mercury dealer.

CLEANING WOOD-TONE TRIM

Wipe stains with a clean, soft cloth and Ultra Clear Spray Glass Cleaner
(E4AZ-19C507–AA). Dry the area by wiping with a dry, soft, clean cloth.

Cleaning

241

This manual is related to the following products: