FORD 2002 Explorer Sport Trac v.1 - Manual (Page 235)

3 Fill to bottom of filler plug hole.
4 Add the coolant type originally equipped in your vehicle.
5 Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of filler
plug hole.
6 For vehicles equipped with a conventional rear axle, refer to your
scheduled maintenance guide for axle fluid change intervals.
7 Vehicles equipped with Traction-Lok axle require synthetic rear axle
lubricant. Rear axles containing synthetic lubricant are lubricated for life.
These lubricants are not to be checked or changed unless a leak is
suspected or service is required. The axle lubricant should be changed
any time the axle has been submerged in water.
Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or
equivalent meeting Ford specification EST-M2C118–A for complete refill
of Traction-Lok axles.
LUBRICANT SPECIFICATIONS
Item
Ford Part
Name or
equivalent
Ford Part
Number Ford
Specification
Body hinges,
latches, door
striker plates
and rotors, seat
tracks, fuel filler
door hinge and
spring, hood
latch, auxiliary
latch, seat
tracks
Multi-Purpose
Grease
D0AZ-19584-AA
or
F5AZ-19G209-AA
ESB-M1C93-B or
ESR-M1C159-A
Hydraulic clutch
fluid and brake
fluid
High
Perfromance
DOT 3 Motor
Vehicle Brake
Fluid
C6AZ-19542-AB
ESA-M6C25-A
and DOT 3
Capacities and specifications
235