beautypg.com

Driver controls – FORD 2002 Excursion v.1 User Manual

Page 99

background image

To turn speed control off

• Press OFF or
• Turn off the vehicle ignition.
Once speed control is switched off,
the previously programmed set
speed will be erased.

To set a speed

• Press SET ACCEL. For speed

control to operate, the speed
control must be ON and the
vehicle speed must be greater
than 48 km/h (30 mph).

If you drive up or down a steep hill, your vehicle speed may vary
momentarily slower or faster than the set speed. This is normal.

Speed control cannot reduce the vehicle speed if it increases above the
set speed on a downhill. If your vehicle speed is faster than the set
speed while driving on a downhill, you may want to shift to the next
lower gear or apply the brakes to reduce your vehicle speed.

If your vehicle slows down more than 16 km/h (10 mph) below your set
speed on an uphill, your speed control will disengage. This is normal.
Pressing RES will re-engage it.

Do not use the speed control in heavy traffic or on roads that
are winding, slippery, or unpaved.

Driver controls

99