beautypg.com

Seating and safety restraints – FORD 2002 Crown Victoria v.2 User Manual

Page 136

background image

3. Locate the correct anchor for the
selected seating position.

4. Open the tether anchor cover.

5. Clip the tether strap to the
anchor as shown.

If the tether strap is clipped
incorrectly, the child safety

seat may not be retained properly
in the event of a collision.

6. Refer to the Installing child safety seats in combination lap and
shoulder belt seating positions
section of this chapter for further
instructions to secure the child safety seat.

7. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.

If the safety seat is not anchored properly, the risk of a child
being injured in a collision greatly increases.

Seating and Safety Restraints

136