FORD 2003 Mustang v.4 - Manual (Page 50)

4. Close the windshield header clamps immediately
after disengagement, to avoid cutting the top
material and to permit installation of the vinyl boot.
5. If the top has not
been lowered for some
time and sticks to the
windshield header,
push the front of the
top up slightly with
your hand to loosen it.
6. Push the convertible
top switch on the
console in front of the
armrest and hold until
the top is completely
stored.
7. Disengage the
parking brake.
Installation of the boot (if equipped)
1. Push boot rearward
and engage boot under
the body molding at
the rear and sides.
2. Fasten boot to
quarter trim panel with
snap or pivot latch on
both sides of the
vehicle.
S
E
T PAR
K BRAK
E
Driver Controls
50