Driver controls – FORD 2003 F-150 v.1 User Manual

Page 65

Increasing speed while using speed control

There are two ways to set a higher
speed:
• Press and hold the SET ACCEL

control until you get to the
desired speed, then release the
control. You can also use the SET
ACCEL control to operate the
Tap-Up function. Press and
release this control to increase the vehicle set speed in small amounts
by 1.6 km/h (1 mph).

• Use the accelerator pedal to get to the desired speed. When the

vehicle reaches that speed press and release the SET ACCEL control.

Reducing speed while using speed control

There are two ways to reduce a set
speed:
• Press and hold the COAST

control until you get to the
desired speed, then release the
control. You can also use the
COAST control to operate the
Tap-Down function. Press and
release this control to decrease the vehicle set speed in small amounts
by 1.6 km/h (1 mph).

• Depress the brake pedal until the

desired vehicle speed is reached,
press the SET ACCEL control.

RES

SET

ACCEL

COAST

RES

SET

ACCEL

COAST

RES

SET

ACCEL

COAST

Driver Controls