beautypg.com

Seating and safety restraints – FORD 2003 Explorer v.2 User Manual

Page 133

background image

4. Clip the tether strap to the
anchor.

If the tether strap is clipped incorrectly, the child safety seat
may not be retained properly in the event of a collision.

5. Refer to the Installing child safety seats in combination lap and
shoulder belt seating positions
section of this chapter for further
instructions to secure the child safety seat.

6. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.

If the safety seat is not anchored properly, the risk of a child
being injured in a collision greatly increases.

Attaching safety seats with LATCH (Lower Anchors and Tethers for
Children) attachments for child seat anchors

Some child safety seats have two rigid or webbing mounted attachments
that connect to two anchors at certain seating positions in your vehicle.
This type of child seat eliminates the need to use seat belts to attach the
child seat. For forward-facing child seats, the tether strap must also be
attached to the proper tether anchor. See Attaching safety seats with
tether straps
in this chapter.

Seating and Safety Restraints

133