Maintenance and specifications – FORD 2003 Escape v.1 User Manual
Page 222
Item
Ford Part
Name or
equivalent
Ford Part
Number
Ford
Specification
Automatic
transaxle
2
Motorcraft
MERCON
ATF
XT-2-QDX
MERCON
Power steering
fluid
Motorcraft
MERCON
ATF
XT-2-QDX
MERCON
Rear axle (4X4)
4
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant
XY-80W90-QL
WSP-M2C197-A
Power
Take-off(PTO)
(4X4-Manual
Transaxle)
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant
XY-80W90-QL
WSP-M2C197-A
Power
Take-off(PTO)
3
(4X4-Automatic
Transaxle)
Motorcraft SAE
75W-140
Synthetic Rear
Axle Lubricant
XY-75W140–QL
WSL-M2C192-A
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
ZC-32–A
WSB-M8B16–A2
1
DO NOT USE Ford Extended Life Engine Coolant F6AZ-19544-AA,
meeting Ford specification WSS-M97B44-D (orange in color) Refer to
Adding engine coolant, in the Maintenance and Care chapter.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON
and MERCON V. Refer to your scheduled maintenance
guide to determine the correct service interval.
3
The Power Take-off(PTO) is lubricated for life with synthetic lube.
Lubricant levels are not to be checked or changed unless a leak is
suspected or repair required. Replace Power Take-off(PTO) lubricant
with specified synthetic lubricant anytime the unit is submerged in
water. Never engage the 4X4 feature while on dry pavement.
Maintenance and Specifications
222