beautypg.com

Maintenance and specifications – FORD 2004 Expedition v.1 User Manual

Page 324

background image

Changing tires with TPMS

It is recommended that you always
have your tires serviced by a dealer
or qualified technician. Each road
tire is equipped with a tire
pressure sensor mounted on the
wheel inside the tire connected
to the valve stem. The tire
pressure sensor must be unbolted from the wheel prior to tire
removal. The sensor can be removed by loosening the nut at the
valve stem. Failure to remove the sensor may damage it.
The
rubber grommet (washer) between the wheel and the tire pressure
sensor needs to be replaced when any tire is changed to minimize air
leaks.

The tire pressure should be checked periodically (at least monthly) using
a tire gauge, refer to Checking the tire pressure in this chapter.

SNOW TIRES AND CHAINS

Snow tires must be the same size and grade as the tires you
currently have on your vehicle.

The tires on your vehicle have all weather treads to provide traction in
rain and snow. However, in some climates, you may need to use snow
tires and chains.

Follow these guidelines when using snow tires and chains:
• Use only cable type chains or chains offered by Ford as an accessory

or equivalent. Other conventional link type chains may contact and
cause damage to the vehicle’s wheel house and/or body.

• Do not install chains on the front wheels. Chains on the front wheels

may interfere with suspension components.

• Install chains securely, verifying that the chains do not touch any

wiring, brake lines or fuel lines.

• Drive cautiously. If you hear the chains rub or bang against your

vehicle, stop and re-tighten the chains. If this does not work, remove
the chains to prevent damage to your vehicle.

• If possible, avoid fully loading your vehicle.
• Remove the tire chains when they are no longer needed. Do not use

tire chains on dry roads.

2004 Expedition (exd)
Owners Guide (post-2002-fmt)
USA English
(fus)

Maintenance and Specifications

324