beautypg.com

Removing the jumper cables, Roadside emergencies – FORD 2005 Ranger v.2 User Manual

Page 174

background image

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an
additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were
connected.

1. Remove the jumper cable from the ground metal surface.

Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.

2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.

+

+

+

+

2005 Ranger (ran)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

174