beautypg.com

Replacing front parking lamp/turn signal bulbs, Lights – FORD 2005 Focus v.4 User Manual

Page 35

background image

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control
is in the OFF position and open the
hood.

2. Remove the bulb socket from the
lamp assembly by turning
counterclockwise.

3. Pull the bulb straight out of the
socket.

Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (3dr & 5dr)

1. Make sure the headlamp control
is in the OFF position and then
open the hatchback.

2. From inside the luggage
compartment remove the wing nut
of the rear light assembly cover.

3. Using a Phillips screwdriver
remove the screw. The lamp is still
retained by a spring loaded clip.
Remove by gently pulling out the
light housing.

4. Turn the bulb socket counterclockwise as far as possible and pull it
out.

5. Pull the bulb straight out of the socket.

Install in reverse order.

2005 Focus (foc)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

35