beautypg.com

Maintenance and specifications – FORD 2005 Focus v.1 User Manual

Page 204

background image

Fluid

Ford Part Name

Application

Capacity

Transaxle
fluid

Motorcraft Full
Synthetic Manual
Transmission Fluid

5-speed manual

2.0L (2.1 quarts)

3

Motorcraft
MERCON

௡ V ATF

Automatic

2

6.6L (6.9 quarts)

3

Windshield
washer fluid

Motorcraft
Premium
Windshield Washer
Concentrate

All

4.8L (5.1 quarts)

1

Add the coolant type originally equipped in your vehicle.

2

Ensure the correct automatic transmission fluid is used. Transmission

fluid requirements are indicated on the dipstick or on the dipstick handle
or as listed in the Owner Guide. Check the container to verify the fluid
being added is of the correct type. Refer to your Scheduled
Maintenance Guide
to determine the correct service interval.

Some transmission fluids may be labeled as dual usage, such as
MERCON

௡ and MERCON௡ V. These dual usage fluids are not to be used

in an automatic transmission that requires use of the MERCON

௡ type

fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON

௡ V type fluid.

MERCON

and MERCONV type fluids are not interchangeable.

DO NOT mix MERCON

and MERCONV. Use of a transmission

fluid that indicates dual usage (MERCON

and MERCONV) in

an automatic transmission application requiring MERCON

may

cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.

3

Approximate dry fill capacity including transmission fluid cooling

system, actual refill capacities will vary based on vehicle application and
transmission fluid cooling system (i.e. coolers size, cooling lines. auxiliary
cooler capacities). The amount of transmission fluid and fluid level
should be set by the indication on the dipstick’s normal operating range.

The manual transmission service refill capacity is determined by filling
the transaxle to the bottom of the filler hole with the vehicle on a level
surface.

4

Use of synthetic or synthetic blend motor oil is not mandatory. Engine

oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.

2005 Focus (foc)
Owners Guide (post-2002-fmt)
USA English
(fus)

Maintenance and Specifications

204