beautypg.com

Bed extender (if equipped), Driver controls – FORD 2005 F-150 v.3 User Manual

Page 82

background image

5. Lift right side off of its hinge.

6. Lift tailgate to a 80–degree angle from horizontal.

7. Remove tailgate from left side hinge by sliding tailgate to the right.

To install, follow the removal procedures in reverse order.

BED EXTENDER (IF EQUIPPED)

Your vehicle may be equipped with a bed extender designed to extend
the pickup box for longer loads.

To extend the bed extender:

1. Lower tailgate.

2. Pull the round knobs on each side
of the extender to release it from
the pickup box.

3. Pivot extender on to the tailgate.

4. Evenly push down on the
extender and push the round knobs
in on each side locking it in place.

Green markings on the shaft
indicate the locked position. The
locking clip screws below the middle
bar can be tightened
counterclockwise for extra security.

Note: If the red marking on the
shaft is visible, the bed extender
is not locked or properly secured.

2005 F150 (f12)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Driver Controls

82