Using the right bulbs, Replacing headlamp (high/low beam) bulbs, Lights – FORD 2006 Freestyle v.1 User Manual
Page 57
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized “D.O.T.” for North America and an “E” for
Europe to assure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.
Function
Number of bulbs
Trade number
Front park/turn lamp
2
3157AK or
3157A (amber)
Front sidemarker lamp
2
168
Headlamp
2
9008 H13
Tail/brake/turn signal lamp
2
4057K
Backup lamp
2
3156
License plate lamp
2
168
High-mount brake lamp
5
W5W
Foglamp (if equipped)
2
H11 LL
Map lamp
2
12V6W
Dome/reading lamps
6
578
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your authorized dealer.
Replacing headlamp (high/low beam) bulbs
1. Make sure headlamp switch is in the OFF position, then open the
hood.
2. Reach behind the headlamp assembly to access the bulb sockets and
connectors.
3. Locate the outboardmost
electrical connector and remove it
by releasing the locking tab and
pulling it off.
4. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.
2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
57